ATC chips — alkali-treated cottonii — are an intermediate product between dried seaweed and semi-refined carrageenan. They are made by cooking dried Kappaphycus alvarezii in an alkaline solution, washing and drying it, and cutting it into small pieces. Milled into powder, the chips become semi-refined carrageenan, known in food labelling as processed Eucheuma seaweed (E407a). For raw seaweed suppliers, ATC matters because it is one of the main routes by which cottonii reaches the market.
How ATC chips are made
The process is relatively simple compared with refined carrageenan, which is one reason it is widely used. In outline:
- Cleaning. Dried cottonii is sorted and washed to remove sand, salt and foreign matter.
- Alkali cooking. The seaweed is soaked and heated in a hot alkaline solution, typically potassium hydroxide. The alkali modifies the carrageenan chemically, improving its gel strength, while the potassium keeps the kappa carrageenan inside the seaweed rather than dissolving it out.
- Washing. Excess alkali and soluble material are rinsed away, leaving the carrageenan together with the seaweed’s cellulose and other insoluble components.
- Drying and chopping. The treated seaweed is dried, often in the sun or in dryers, and cut into chips of a consistent size.
- Milling (optional). Chips are ground into powder to make semi-refined carrageenan, or sold as chips to other processors.
Because the carrageenan is not extracted and filtered, the product retains fibre and has lower clarity than refined carrageenan. The two routes are compared in semi-refined vs refined carrageenan.
Where ATC ends up
- Pet food: a major use. Semi-refined carrageenan binds and gels canned and pouched wet pet food, where its cloudiness does not matter. See seaweed in pet food and animal feed.
- Processed meat: semi-refined grades are used for water binding and texture in some meat products.
- Other food uses: where permitted as E407a and where clarity is not required.
- Further processing: chips may be sold on to processors who mill and blend them to customer specifications.
What ATC processing needs from raw seaweed
The alkali process concentrates the good and the bad in the raw material. Because nothing is filtered out, impurities that survive washing end up in the final product. Processors making ATC therefore pay close attention to:
- Species purity: ATC is made from cottonii. Mixing in spinosum or other seaweeds changes the gel behaviour.
- Cleanliness: sand, stones, rope and plastic are costly to remove and can remain in the product.
- Moisture: seaweed that is too wet loses value in storage and distorts weight-based pricing.
- Maturity and drying quality: well-grown, properly dried seaweed gives better yield and gel strength.
- Consistency between lots: so that the processor can hold its own product specification steady.
For suppliers, the practical lesson is that the habits which protect dried seaweed quality in general — drying off the sand, keeping species and lots separate, packing in clean sacks and storing off the floor — matter even more when the buyer is an ATC processor. A lot that looks acceptable by eye can still disappoint once it has been cooked, washed and weighed as finished chips.
Yield is commonly assessed as clean anhydrous weed; see our CAW explainer. Gel strength, the other key figure, is discussed in what the gel strength number means.
Frequently asked questions
Is ATC the same as semi-refined carrageenan?
Closely related. ATC chips are the treated seaweed before milling; semi-refined carrageenan is usually the milled powder. The terms are sometimes used loosely in trade, so it is worth confirming what a specification means.
Can spinosum be alkali-treated in the same way?
Alkali treatment is also applied to other carrageenan seaweeds, but ATC as a trade term refers to cottonii. Iota-bearing spinosum is normally processed and sold separately.
Why does the alkali improve gel strength?
Raw seaweed contains precursor forms of carrageenan that gel poorly. Hot alkali converts much of this material into the form that gels well, so the treated product performs better than untreated seaweed.
Working with Kospermindo
Kospermindo aggregates dried cottonii from organised farmer groups in South and Central Sulawesi for processing factories and exporters. See our products and trade page to learn more.

