The cheapest place to fix a quality problem in dried seaweed is the point where it enters the chain: the collection point where farmers bring their sacks to be weighed. Once seaweed from many farmers has been combined, a damp or sandy batch cannot be pulled out again, and the cost of that mistake travels all the way to the processor. Good collection checks are quick, consistent and explained to the farmer. They are as much about teaching as about sorting.
What a collection check is for
A check at collection does three jobs at once. It protects the lot being built, so that one poor delivery does not drag down the grade of everything around it. It sets a fair price for the farmer, because payment depends on weight and weight depends on how much water, salt and sand is in the sack. And it produces information: which farmers, which areas and which harvest periods are giving trouble, and why.
None of this needs a laboratory. Most of the work is done with eyes, hands, a clean sheet, a calibrated scale and a notebook. Where a moisture meter or a simple oven test is available, it confirms what the grader already suspects.
The checks, in the order they are done
- Look before weighing. Check colour and cleanliness, and look for raffia ties, plastic, stones, shells or other species mixed in. Note anything unusual before the sack goes on the scale.
- Feel for dryness. Experienced graders can judge dryness by hand, from how brittle or pliable the thalli are and whether the inside of the sack feels cool or damp. Hand checks are useful but subjective, so back them with a measured sample when there is doubt.
- Test for salt and sand. Shake a handful over a sheet. Sand falls out; a thick crust of salt crystals is visible on the surface. Both add weight that the processor will not pay for.
- Open more than one place. Take material from the top and from deeper in the sack, and from more than one sack in a delivery. Problems are often hidden in the middle.
- Weigh and record. Use a scale that is checked regularly, write down the weight in front of the farmer, and record the grade and any defects noted.
- Assign the delivery to a lot. Mark the sacks so the record can be linked to where they are stored and shipped.
The last two steps connect collection to the rest of the chain. Our posts on fair weighing and lot codes and labels go into each in more detail.
Rejecting versus improving
Turning a farmer away is sometimes necessary, but it rarely solves the problem. Rejected seaweed usually finds another buyer who checks less carefully, and the farmer learns only that one buyer is difficult. Where the defect can be corrected, correcting it is usually better for everyone:
- Too wet: return it for further drying, or dry it at the collection point if there is space, and weigh it again afterwards.
- Salty or sandy: ask for it to be shaken and cleaned; explain how drying off the ground prevents it next time.
- Mixed with foreign matter: sort it on the spot with the farmer present, so the weight reflects clean seaweed.
- Old, discoloured or mouldy: keep it apart from the main lot as a lower grade, or refuse it if it would put a shipment at risk.
The aim is a clear, predictable rule that farmers understand in advance, not a negotiation at the scale.
Feedback farmers can actually use
A grade is only useful if the farmer knows what caused it. Showing the sand on the sheet, or letting a farmer feel the difference between a properly dried sample and their own, teaches more than a lower price does. Collectors who keep simple records can also spot patterns, such as one stretch of coast that always delivers salty seaweed, and follow up with the group concerned. Most defects trace back to drying and handling, which we cover in why drying decides the price and common defects in dried seaweed.
Frequently asked questions
Do collection points need a moisture meter?
It helps, but it is not the starting point. Consistent hand checks, regular sampling and a calibrated scale do most of the work. A meter or oven test is most valuable for settling doubtful cases and for checking that graders are judging dryness the same way.
Should every sack be opened?
Not necessarily, but enough sacks should be opened, and deep enough, that farmers know any sack might be checked. Opening only the top of one sack invites problems to be packed lower down.
Who should do the checking?
Someone trained, consistent and trusted by both sides. Rotating graders without shared guidance produces different results on different days, which quickly undermines farmers’ confidence in the grading.
Working with Kospermindo
Kospermindo has supported seaweed farmer groups in South and Central Sulawesi since 2002, with Farmer Group Centres that provide mentoring and technical assistance. To discuss supply from organised groups, see our partnership page.

